Evolution Coin Hopper

Evolution Coin Hopper

	Bulgin (Black) Connector

	Cinch (Yellow) Connector

This belt driven hopper has been re-engineered and the result is an improvement over existing belt driven hoppers in its performance and maintenance
This unique concept provides a single build type hopper that is suitable for 95% of the world's coins and tokens without needing any adjustments
The Evolution Hopper is suitable for many applications such as: Vending, Parking, Change, Amusement and Gaming machines
Made from extremely strong, wearing resistant plastics in combination with state of the art electronics resulting in low cost of ownership
Large DC motor in combination with electronic motor control board for reduced friction and motor noise
Optic board is easily accessible by removing the electronic control board from outside the hopper
Connector can be easily changed from front to back by just loosening two screws and pulling the cable with connector in its position (reduced inventory for manufacturers that use both styles)
The Evolution Hopper is available in different interfaces: Standard parallel, ccTalk encrypted and non-encrypted serial interfaces
Serial interfaces provide higher security and better diagnostics especially by networked machines
Supplied with standard quick-fit and release plate, connector as shown or optional with Bulgin connector
Specific models replace Money Controls hoppers within Western Money Systems TicketXchange and CasinoXchange kiosks

Features:

- Modular space - efficient system
- High Capacity > 1500 coins of Quarters
- RoHS Complaint
- In build agitator to prevent coin jams
- Hopper is protected by anti-jam electronics
- Large motor reduces motor noise
- High quality materials for long trouble free operation
- Easily removable and accessible electronics
- Hopper connector can easily be changed from

- Low and high level sensing
- Competitively priced
- Low cost of ownership
- 3 Different coin sizes available: 16.25-20.9mm, 19-26.4mm(Euro Hopper), 21-30mm

Coin Range:	Diameter	.63-1.22"
	Thickness	.05-.14"
Coin Capacity:	1100 x E1
Payout Speed:	approx. 270 coins per minute
Electrical Interface:		Parallel	Serial
Voltage:	Nominal	24VDC	24VDC
	Minimum	18VDC	20VDC
	Maximum	26VDC	26VDC
Current (Typical):	Idle	40 mA	40 mA
	Empty	0.2 A	0.2 A
	Full	0.7 A	0.7 A
	Surge	2.5 A	2.5 A
Environmental:	Operating Temperature	0-70°
	Operating Humidity	5-95%
Interface Options:	Standard: Parallel
	Serial: ccTalk